20 Myths About Double Glazed Window Repair: Busted

Double Glazed Window Repair

It's worth checking the warranty that comes with double-glazed windows in the majority of cases. It generally covers any problems with the window hardware including hinges and locking mechanisms - within the first 10 years.

A leak in the seal can be the reason for mist to form between your glass windows. This should be addressed immediately to prevent mould or damp forming within your home.

Condensation Between the Windows

If you notice condensation appearing between your windows, it is an indication that the seal holding in the gas insulating the windows has failed. This is a serious issue that should be addressed immediately, particularly in winter when the humidity levels are at their highest. It can also cause damage to the sills and sealant, or even mildew or mould.

Ideally, double-glazed windows should never be able to experience condensation between the panes. This problem can be caused by extreme humidity or a cold snap. The issue can usually be resolved without the need to replace the entire window. A professional can drill small holes in the glass and spray the inside of the window with a specially-formulated cleaning solution. The water is then drained from the window. An anti-fogger is installed to stop the build-up of moisture in the future.

Condensation can also happen between windows due to air leakage, or other factors outside the window. If this is the scenario, it's likely to take longer for moisture to collect inside the window, since the air will need to be warm enough to allow the water molecules to vaporise. In these situations it is more beneficial to replace double-glazed windows than to try to repair the sealed units.

A double-glazed window is made consisting of three or more pieces of insulated glass that are held together by a metal frame. The gap between the two of the window is filled with a non-toxic gas for insulation such as argon or krypton and then sealed. The seal prevents the insulating gas from escaping and also prevents air and moisture from entering into the gap.

As windows get older, the seals weaken and allow moisture to leak into the gaps between the glass panes. It is important to recognise the signs of leaks in the seals because it indicates that the double glazing is no longer functioning as efficiently as it did in the past. This could result in lower energy efficiency, increased heating bills, property damage and the possibility of condensation forming between the windows.

Mist

If you have condensation on the outside of your windows, this is normal and indicates that your double glazing is functioning properly and retaining the heat in your home. The condensation is caused by the air outside is warmer than the glass, and reaches the dew point of the window before the air inside. Double glazing of top quality is a great way to accomplish this.

If the condensation is located on the inside of your window, this could be an indication of a ventilation problem in your home. This is because the extra moisture has nowhere to go and is deposited on your windows or in carpets, furniture, and in other areas within your home. This can be avoided by having it examined by an expert and ensuring that there is plenty of fresh air in your home.

Another reason why you may get mist on your double-glazed window is that the seal between the two panes has broken down. This can be caused by wear and tear or due to the use of chemical cleaning products. If this happens the best solution is to have the windows repaired as soon as possible.

Repairing your windows professionally will ensure they remain dry and free of condensation, fogging and misting. This is also much cheaper than replacing your windows and you will save money on your energy bills.

A FENSA registered window installer will provide you with a quote for repair or replacement of your double glazed windows. Upgrade your windows to energy-efficient A-rated ones when they are old.

It is a good idea to retain copies of any agreements and warranties with the window installers. This will be very useful should any issues with the windows occur in the future, and you then contact your fitters to resolve the issue. This is better than ignoring the issue, which could lead to additional problems in your home.

upvc window repairs  to Open or Close

If double-glazed windows are difficult to open and close, it isn't just annoying and can result in higher energy bills because of loss of heat and drafts. It could also be a security risk, especially when the locks aren't working properly. It is vital to fix any issues with double-glazed doors and windows when you notice them.

If you have tried opening your window using the simplest methods, like using an electric screwdriver or tapping the frame using a solid object, the issue may be more serious. It could be that the window is sagging within its frame and requires to be set again or it could be that there is a gap between the glass panes and frames. In either of these scenarios, you must call in a professional double glazing repair expert to make sure that the proper repairs are made and to prevent future problems.

It is not unusual to find UPVC window handle and lock mechanisms to become difficult to operate or become stuck particularly if they're old and worn. This is usually due to an accumulation of dirt or grease inside the handle. This can be easily solved by cleaning it using a uPVC cleanser. If this doesn't work, you can try gently tapping the uPVC frame with a sharp object, such as a screwdriver, being careful not to scratch the handle or the mechanism for window handles.

If this does not solve the problem, the window will need to be replaced as the hinges might not be in the proper position or the locking mechanism could be damaged. In this instance you should speak to a UPVC window specialist.

David The Window Wizard is a specialist in double-glazed window and door repairs, including repairing a double-glazed window that has jammed or been locked shut. He has a lot of experience in converting older window mechanisms into modern ones. This could save you money by replacing the entire window. Call or email us today for more details or a free quote.

Warping

Double-glazed windows can be a great way to save energy in your home. They are made up of two distinct panes, with a spacer air or dense gas between the panes. This creates an airtight seal to keep cold air out and warm air in. However, over time, these windows may become damaged or break and require repair. Most of these repairs can be completed without having to replace the entire window.

One of the most common issues double-glazed windows face is warping. This happens when windows start to bow, bend or twist, which can impact the structural integrity of the window as well as its ability to insulate. The best way to avoid this issue is to ensure that double-glazed windows are properly installed and maintained regularly.

Get in touch with a professional as soon as you realize that your double-glazed windows are warping. This will help to stop the problem from becoming worse. They will be able inspect your windows to identify the root cause. They will then utilize specific tools to correct the problem and ensure that your windows are sealed again.

A common cause of this issue is the presence of water vapour in the windows which can get accumulated over time. It can be caused by various factors like weather conditions, humidity and temperature variations. To resolve this issue the expert will drill a small hole through the window to release the moisture. The specialist will use a cleaner on the glass to clean it and then apply an adhesive.

In the alternative, if your windows aren't able to be closed or opened, this may be a sign of a problem with the mechanism or hinges. Before calling an expert to resolve the issue, it's recommended to lubricate the parts. This can usually fix the issue and decrease your need for replacements. If your windows are old or don't provide the insulation you want it might be better to replace them.